published date :jan 17,2008 drawing no : xdsa7997 v4 checked : b.l.l iu p.1/6 part number: XZMEBGGBBG61W 3.2x3.6mm full-color surface mount led lamp part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. XZMEBGGBBG61W red ingaalp 110 297 630 120 green ingan 110 248 520 blue ingan 50 148 468 water clear attention observe precautions for handling electrostatic discharge sensitive devices features z low power consumption. z 3.2mmx3.6mm smt led, 1.1mmthickness. z can produce any color in visible spectrum, including white light. z one orange, one green and one blue chips in one package. z package : 1000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. preliminary spec absolute maximum ratings (t a =25c ) me (inga alp) bgg (inga n) bbg (ing an) unit reverse voltage v r 5 5 5 v forward current i f 30 30 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 195 100 100 ma power dissipation p t 75 120 120 mw - 1000 1000 v operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 electrostatic discharge threshold (hbm) me (ingaa lp) unit forward voltage (typ.) (i f =20ma) v f 2.0 v forward voltage (max.) (i f =20ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 630 nm wavelength of dominant emission (typ.) (i f =20ma) d 621 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 20 nm capacitance (typ.) (v f =0v, f=1mhz) c 25 pf operating characteristics (t a =25c ) bbg (ing an) 3.2 4.0 10 468 470 21 100 bgg (inga n) 3.2 4.0 10 520 525 35 100 notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3.specifications are subject to change without notice.
published date :jan 17,2008 drawing no : xdsa7997 v4 checked : b.l.l iu p.2/6 part number: XZMEBGGBBG61W 3.2x3.6mm full-color surface mount led lamp ? me
published date :jan 17,2008 drawing no : xdsa7997 v4 checked : b.l.l iu p.3/6 part number: XZMEBGGBBG61W 3.2x3.6mm full-color surface mount led lamp ? bgg
published date :jan 17,2008 drawing no : xdsa7997 v4 checked : b.l.l iu p.4/6 part number: XZMEBGGBBG61W 3.2x3.6mm full-color surface mount led lamp ? bbg
published date :jan 17,2008 drawing no : xdsa7997 v4 checked : b.l.l iu p.5/6 part number: XZMEBGGBBG61W 3.2x3.6mm full-color surface mount led lamp ? tape specification (units : mm) remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity/ luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. ? recommended soldering pattern (units : mm; tolerance: 0.1) ? the device has a single mounting surface. the device must be mounted according to the specifications .
published date :jan 17,2008 drawing no : xdsa7997 v4 checked : b.l.l iu p.6/6 part number: XZMEBGGBBG61W 3.2x3.6mm full-color surface mount led lamp packing & label specifications XZMEBGGBBG61W
|